Effect of milling on the anisotropic grain growth in a sintered Ba5Nb4O15 specimen and its effect on microwave dielectric properties

In this study, relationships between the processing, microstructure, and properties of barium niobate (Ba₅Nb₄O₁₅) are investigated. The milling of a Ba₅Nb₄O₁₅ powder in water is effective with respect to size reduction. However, after milling in water, BaCO₃ is formed within the slurry. With the increase in the amount of BaCO₃ formed, the aspect ratio of the elongated Ba₅Nb₄O₁₅ grains increases. The formation of the elongated Ba₅Nb₄O₁₅ grains prohibits the densification. Hence, the microwave dielectric properties, including permittivity and quality factor, are poor because of the low density. In addition, milling in ethanol is carried out for comparison: A lower amount of BaCO₃ is formed after milling in ethanol; the extent of anisotropic grain growth is thus reduced.     

On global Hessenberg based methods for solving Sylvester matrix equations

In the first part of this paper, we investigate the use of Hessenberg-based methods for solving the Sylvester matrix equation $AX+XB=C$. To achieve this goal, the Sylvester form of the global generalized Hessenberg process is presented. Using this process, different methods based on a Petrov–Galerkin or on a minimal norm condition are derived. In the second part, we focus on the SGl-CMRH method which is based on the Sylvester form of the Hessenberg process with pivoting strategy combined with a minimal norm condition. In order to accelerate the SGl-CMRH method, a preconditioned framework of this method is also considered. It includes both fixed and flexible variants of the SGl-CMRH method. Moreover, the connection between the flexible preconditioned SGl-CMRH method and the fixed one is studied and some upper bounds for the residual norm are obtained. In particular, application of the obtained theoretical results is investigated for the special case of solving linear systems of equations with several right-hand sides. Finally, some numerical experiments are given in order to evaluate the effectiveness of the proposed methods.     

On the Barzilai-Borwein basic scheme in FFT-based computational homogenization

Building upon the equivalence of the basic scheme in the work of Moulinec and Suquet with gradient descent methods, we investigate the effect of using the celebrated Barzilai-Borwein step size selection technique in this context. We provide an overview of recent convergence theory and present efficient implementations in the context of computational micromechanics, with and without globalization. In contrast to polarization schemes and fast gradient methods, no lower bound on the eigenvalues of the material tangent is necessary for the Barzilai-Borwein scheme. We demonstrate the power of the proposed method for linear elastic and inelastic large scale problems with finite and infinite material contrast.     

Studying the effect of particle size on the antibacterial activity of some N-nicotinyl phosphoric triamides

Using ultrasonic top-to-down method, nanoparticles of two N-nicotinyl phosphoric triamides: C₅H₄NC(O)NHP(O)R, R?=?4-CH₃-NC₅H₁₀ (1), (CH₃)₃CNH₂ (2) were prepared for the first time and characterized by ³¹P, ¹³C, ¹H NMR, FTIR, scanning electron microscopy, energy dispersive X-ray. The average particle size of 1 and 2 were 60–70 and 40–50?nm, respectively, and the morphology was spherical for 1 and rod for 2. Solid state (powder) antibacterial effect of these compounds and two other similar reported ones, in their macro- and nanosizes, were evaluated with colony counting method on one Gram-positive (Staphylococcus aureus) and one Gram-negative (Escherichia coli) bacteria in Brain–Heart infusion culture medium. Results showed that all the macro- and nanosized compounds, except macrosized 1, were antibacterial and all nanoscaled ones had stronger antibacterial activity than their macroscaled analogues. The most effect of the particle size was observed for 1: by decreasing the particle sizes, the antibacterial activity state of 1 was changed from inactive (for macro) to potent (for nano).     

载气热提取法测定熔敷金属中扩散氢收集条件的探究

探究了GB/T 3965—2012《熔敷金属中扩散氢测定方法》中载气热提取法收集条件对测定扩散氢含量的影响,并与水银法进行了对比。研究结果表明,样本炉温设定为400℃,A型试块的内部温度大约在51 min时稳定在358℃左右,B型试块内部温度大约在27 min时稳定在391℃左右;载气热提取法电信号曲线收集结束点的电信号及斜率均接近0时获得的结果与水银法具有较好的一致性。     

Multiphase topology optimization with a single variable using the phase-field design method

In this study, a multimaterial topology optimization method using a single variable is proposed by combining the solid isotropic material with penalization method and the reaction-diffusion equation. Unlike ordinary multimaterial optimization, which requires several variables depending on the number of material types, this method intends to represent various materials as one variable. The proposed method combines two special functions in the sensitivity analysis of the objective function to converge the design variable into prespecified density values defined for each of the multimaterials. The composition constraint based on a normal distribution function is also introduced to estimate the distribution of each target density value in a single variable. It enables density exchange between multiple materials by increasing or decreasing the amount of a specific material. The proposed method is applied to structural and electromagnetic problems to verify its effectiveness, and its usefulness is also confirmed from the viewpoint of cost and computation time.     

Biologically Inspired Design of Context-Aware Smart Products

The rapid development of information and communication technologies (ICTs) and cyber–physical systems (CPSs) has paved the way for the increasing popularity of smart products. Context-awareness is an important facet of product smartness. Unlike artifacts, various bio-systems are naturally characterized by their extraordinary context-awareness. Biologically inspired design (BID) is one of the most commonly employed design strategies. However, few studies have examined the BID of context-aware smart products to date. This paper presents a structured design framework to support the BID of context-aware smart products. The meaning of context-awareness is defined from the perspective of product design. The framework is developed based on the theoretical foundations of the situated function–behavior–structure ontology. A structured design process is prescribed to leverage various biological inspirations in order to support different conceptual design activities, such as problem formulation, structure reformulation, behavior reformulation, and function reformulation. Some existing design methods and emerging design tools are incorporated into the framework. A case study is presented to showcase how this framework can be followed to redesign a robot vacuum cleaner and make it more context-aware.     

复合管膜的润湿性及过滤污水机理

为了研究多孔复合管膜对钢铁产业污水的过滤性能及其过滤机理，采用静滴法做了水滴和油滴在复合管膜上的润湿性研究。采用扫描电镜、EDS等手段分析了使用前后的多孔复合管膜外壁及内壁的结构及成分，分析了含油污水中固体颗粒及油的过滤机理，并利用视频光学接触角测量仪测量水滴和油滴在复合管膜上接触角随时间的变化速率。结果表明，在污水过滤过程中，水中小于管膜表层微孔孔径的氧化铁等杂质进入复合管膜内部，无法随水流穿过复合管膜膜层，积累在管膜内部；随着管膜使用时间延长，氧化铁等杂质在复合管膜内部积累量增多。水在复合管膜上的润湿性良好，油滴在复合管膜上是不润湿的。